Product Code: #9655 S3 Motor Additive Hazard Rating |
||||
NFPA LEGEND | FRIGI-TECH NFPA RATING | |||
4 | EXTREME | FIRE | 1 | |
3 | HIGH | TOXICITY | 1 | |
2 | MODERATE | REACTIVITY | 0 | |
1 | SLIGHT | SPECIAL | 0 | |
0 | INSIGNIFICANT | |||
CHEMICAL AD PHYSICAL PROPERTIES – SECTION 1 Chemical Name: Mixture of petroleum Oil and proprietary lubrication additives. Formula: Not applicable Hazardous Decomposition Products: Oxides of carbon and sulfur. Aldehydes may be formed upon in-complete combustion. Incompatibility (Keep away from): Alkali metals. Strong oxidizers.
Form: Liquid Odor: Mild Petroleum Odor Appearance: Viscous liquid Color: Light Amber Specific Gravity (water=1): 0.886 Viscosity SUS at 100 ˚C: 10.5 Volatile (by weight %): Negligible Evaporation Rate: NDA Solubility in Water (by weight %): Negligible Vapor Pressure (mm Hg at 20˚ C): NA Boiling Point: NDA Melting point: NDA Vapor Density (air=1): NDA Ph (as is): NA Stability: Stable |
||||
Product Code: #9655 S3 Motor Additive
FIRE AND EXPLOSION DATA – SECTION II
Special Fire Fighting Procedures: Use water to keep fire-exposed containers cool. Firefighters should wear self-contained breathing apparatus. Do not enter confined fire-space without full bunker. Unusual Fire and Explosion Hazards: Heated containers may explode. Flashpoint: 285° C Flammable Limits %: Not Determined Extinguishing Agents: Dry chemical, CO2, foam, water spray, and sand/earth.
HEALTH HAZARD DATA – SECTION III
Permissible concentrations (air): 5 mg/m3 for oil mist Chronic effects of overexposure: May cause skin irritation. Dermatitis possible with prolonged exposure.
Acute toxicological properties: Eye irritant. Low order of oral and dermal toxicity. Emergency First Aid Procedures: Eyes: Flush with clear water. If irritation persists get medical
attention.
SPECIAL PROTECTION INFORMATION – SECTION IV
Ventilation Type Required: None necessary unless working in confined area. Respiratory Protection: OSHA/NIOSH approved respirator when working with aerosol mist or in confined area. Protective Gloves: Chemical resistant Eye Protection: Chemical safety goggles if splashing possibility exists. Other Protective Equipment: None necessary under normal use. |
||||
Product Code: # 9655 S3 Motor Additive HANDLING OF SPILLS OR LEAKS – SECTION V Procedures for Clean-up: Absorb with inert material such as vermiculite. Sweep up and dispose of in accordance with all local, state, and federal regulations. Make sure product is kept out of sewers and watercourses. Waste Disposal: Assure conformity with all applicable governmental regulations. SPECIAL PRECAUTIONS – SECTION VI Precautions to be taken in handling and storage: Keep containers closed when not in use. Do not store near heat, sparks, or other sources of ignition. TRANSPORTATION DATA – SECTION VII D.O.T.: Not regulated Freight Classification: Petroleum Oil N.O.S. Special Transportation Notes: None COMMENTS – SECTION VIII KEEP OUT OF THE REACH OF CHILDREN!!! All components are listed on the TSCA inventory. |